One-stop Pets Products Supplier
One-stop Pets Products Supplier
VD103 is a hind-leg assist harness for dogs that need help getting around. The hindquarters sit in a padded wrap with two leg sleeves, spring-steel stays run along the leg and back panels, a hook-and-loop waist strap adjusts, and a detachable padded hand grip lets you take weight off the back legs. Four reflective strips run across the harness, and four sizes cover waists from 33 cm to 85 cm. Built for wholesale, OEM and private label programmes.
VD103 is a hind-leg assist harness for dogs that need support to stand, walk or travel. The hindquarters sit in a padded wrap with a sleeve over each back leg, so the harness takes weight through the leg panels rather than across the belly. The fabric is polyester with a perforated foam layer, which is the construction the supplier builds this style from.
Five details do the work. Spring-steel stays run inside the leg and back panels, so the harness bends with the dog and springs back as the leg moves. The waist closes with a hook-and-loop strap plus an adjustable webbing strap. A detachable padded hand grip on webbing lets you take weight off the back legs, and it unclips with swivel snap latches when you do not need it. Four reflective strips run across the harness. It is produced in black, in four sizes.
| Item | Details |
|---|---|
| Model | VD103 |
| Product type | Dog hind-leg assist harness with support stays |
| Colour | Black |
| Fabric | Polyester fabric with a perforated SBR foam layer |
| Waist closure | Hook-and-loop strap plus an adjustable webbing strap |
| Lift handle | Detachable padded hand grip on webbing, secured with swivel snap latches |
| Support stays | Spring-steel stays inside the leg and back panels |
| Visibility | Four reflective strips across the harness |
| Sizes | S, M, L, XL |
| Unit weight | 448.5 g (S), 496 g (M), 562 g (L), 628 g (XL) |
| Unit package size | 22 x 19 x 6 cm (S), 29 x 24 x 5 cm (M), 28 x 22 x 6 cm (L), 28 x 24 x 7 cm (XL) |
| Recommended for | Dogs |
| Retail packaging | Zipper bag |
Four sizes are produced. Waist circumference is the measurement to work from. Measure around the widest point of the hindquarters, where the strap will sit, and check the reading against the chart before ordering in volume.
| Size | Waist | Suggested dog weight |
|---|---|---|
| S | 33 to 43 cm / 13 to 17 in | 7.5 to 12.5 kg / 16 to 27 lb |
| M | 40 to 53 cm / 15 to 20 in | 12.5 to 20 kg / 27 to 44 lb |
| L | 50 to 70 cm / 19 to 27 in | 20 to 30 kg / 44 to 72 lb |
| XL | 65 to 85 cm / 25 to 33 in | 30 to 45 kg / 72 to 99 lb |
The weight figures are the supplier’s suggested dog weight ranges, not a limit the harness enforces. Measurements are taken by hand, so allow for a small difference and read the chart as a guide. Where a dog sits between two sizes, check both against the waist reading and confirm the fit on a sample before ordering in volume.
Two leg sleeves carry the hindquarters, and the waist strap holds the harness in place above them. The closure is a hook-and-loop strap backed up by an adjustable webbing strap, so the fit can be set once and then repeated.
Spring-steel stays sit inside the leg and back panels, the part the supplier calls the memory spring. They let the panels bend with the leg and spring back, which keeps the harness from folding flat against the dog while it moves.
The hand grip is padded, detaches through swivel snap latches, and is the point where a handler takes weight off the back legs. The harness is not a walking harness and the grip is not a leash point.
Four reflective strips run across the harness, which is the visibility feature built into this style.
The harness is put on for the parts of the day where a dog needs help with the hind legs: standing up, short walks, steps, getting in and out of a car, and moving between rooms. The supplier illustrates it for dogs with a hind-leg injury, dogs with a limb difference, older dogs, dogs with joint conditions and dogs recovering after surgery, and for assisted walking, assisted climbing and assisted boarding.
Pet retailers, veterinary clinics, rehabilitation services, groomers and dog rescues stock it as a support item that can be fitted in seconds and adjusted as the dog changes.
VD103 is a support and lifting aid. It is not a medical device, not a walking harness and not a restraint, and it makes no veterinary, diagnostic or curative claim. A dog with a hind-leg injury, a joint condition or recent surgery should be handled under veterinary guidance, and the harness is intended to support a dog while that guidance is followed rather than to treat a condition.
Fit the leg sleeves and set the waist strap so the harness holds without pressing into the skin, check that the reflective strips and the stays sit flat, and lift through the hand grip rather than through the waist strap. Take the harness off if the dog shows signs of distress or the fit rubs, and check the fit again as the dog’s weight and condition change. Never lift a dog by the harness alone, never leave a dog unattended in it, and follow the operator’s own veterinary and animal-welfare policy.
Share your artwork, placement, target dimensions, colour direction, labelling and packaging brief. Verde Pets can discuss minor, drawing-based, sample-based or full customization. Feasibility depends on the style, materials, design complexity, order quantity and final specification. Confirm changes against a sample before production.
These are approximate customization-service references, separate from the product price. Final charges depend on the confirmed design, materials, complexity and order quantity.
| Service | Indicative reference | Minimum |
|---|---|---|
| Logo / Graphic Design | From US$35 per piece | 1 piece |
| Packaging | From US$2 per piece | 300 pieces |
| Hang Tag | From US$1 per piece | 300 pieces |
| Size Customization | Quotation after review | MOQ from 20 pieces |
| Color Customization | Quotation after review | MOQ from 20 pieces |
Provide the destination and order quantity and the available shipping route is confirmed with the quotation. Sea, air and express options can be reviewed against the confirmed order. Transit times are quoted for each shipment rather than published as a fixed table.
What is VD103 made of?
The supplier lists the composition as 100% polyester with SBR. The fabric is a polyester knit with a perforated SBR foam layer, and the perforations are visible on the leg panels.
What sizes are available?
Four sizes. S fits a waist of 33 to 43 cm, M fits 40 to 53 cm, L fits 50 to 70 cm and XL fits 65 to 85 cm. The supplier’s suggested dog weight ranges are 7.5 to 12.5 kg, 12.5 to 20 kg, 20 to 30 kg and 30 to 45 kg.
How do I choose the right size?
Measure around the widest point of the hindquarters, where the waist strap will sit, and compare the reading against the chart. Waist is the measurement that decides the size. Measurements are taken by hand, so allow for a small difference and confirm the fit on a sample before ordering in volume.
What colours are available?
One: black.
How does the harness close?
A hook-and-loop strap fastens over the back, and an adjustable webbing strap lets the fit be set and repeated. There is no buckle to thread.
How does the hand grip attach?
The padded hand grip runs on webbing and clips to the harness with swivel snap latches, so it can be taken off when it is not needed.
What are the spring-steel stays for?
They sit inside the leg and back panels, let the panels bend with the leg and spring back as the leg moves, and keep the harness from folding flat against the dog. The supplier calls this part the memory spring.
How visible is the harness at night?
Four reflective strips run across the harness, which is the visibility feature the supplier builds into this style. Everyday night visibility still depends on the light sources around you.
Can I attach a leash to it?
No. VD103 is a support and lifting aid, not a walking harness, and the hand grip is a lifting handle rather than a leash point. Use a separate collar or walking harness for a leash.
Is it a medical device?
No. It is a support and lifting aid and makes no veterinary, diagnostic or curative claim. A dog with a hind-leg condition should be handled under veterinary guidance.
How is it packed?
In a zipper bag, one harness per bag. The unit package measures 22 x 19 x 6 cm in S, 29 x 24 x 5 cm in M, 28 x 22 x 6 cm in L and 28 x 24 x 7 cm in XL. Custom packaging and hang tags can be quoted.
Can I order custom colours, sizes or my own logo?
Yes. Logo and graphic design customization, custom packaging and custom hang tags are available, and custom colour and custom size are quoted after review. See the Custom Service Reference above.
How long does sampling take?
Sample development usually takes about 5 to 11 working days.
Send your size run, quantity, packaging brief and destination through https://www.verdepets.com/contact-us/.
We focus on the production of functional and differentiated products such as pet apparel and harnesses.